Oil / Water Temperature Sensor ...
Part No: U2F-TS-KT
K TunedK Tuned
K-TUNED 4 BAR MAP SENSOR (K-SERIES ENGINE)1K-TUNED 4 BAR MAP SENSOR (K-SERIES ENGINE)
Applications: All K-Series engines Fits K-Tuned Throttle Bodies Note: * Excludes K24Z-Series Engines * Requires engine management to use (Flashpro/K-Pro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors * We offer a 1 year warranty with all MAP Sensors. K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or supercharger setups and ...
K TunedK Tuned
K-TUNED 4 BAR MAP SENSOR (FOR K24Z ENGINE)K-TUNED 4 BAR MAP SENSOR (FOR K24Z ENGINE)
Applications:  12-15 Civic Si  13+ ILX  09-10 TSX CU  06-11 Civic (R18 Motor)  06-09 S2000 AP2 11-13 CR-Z Note: * Requires an engine management (Flashpro/Kpro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or supercharger setups and will reliably support ...
K TunedK Tuned
K-TUNED 4 BAR MAP SENSOR (B/D/H/F Series)1K-TUNED 4 BAR MAP SENSOR (B/D/H/F Series)
Applications: 88-91 Civic EF 92-95 Civic EG 96-00 Civic EK 90-93 Integra DA 94-01 Integra DC 92-96 Prelude BA 07-01 Prelude BB 00-04 S2000 AP1 94-97 Accord CD 98-02 Accord CG Note: * Requires an engine management (Flashpro/Kpro/S300/AEM) * We offer a 1 Year Warranty with all MAP sensors K-Tuned 4 BAR MAP Sensors are designed to accurately read the increased manifold pressures on turbo or ...
AEM's Bosch 4.9LSU Wideband UEGO O2 replacement sensor kit includes only the sensor (with attached cable and male connector) and is intended to replace an existing mounted wideband sensor used with AEM Digital Wideband UEGO Air/Fuel Controller Part Number 30-4110. These sensors have a laser-etched, calibrated resistor in the sensor's connector body. This resistor is specifically created for ...
Part No: aem30-2004
The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control. Features: *A 10 lb waste-gate spring will enable 50+ psi of boost *Better spool-up and mid range power *Better duty cycle control For use with: *S300 ...
Part No: HDAT-4PRT-BC
AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensors, exhaust gas temperature (EGT) sensors, nitrous oxide/brake pressure sensors, UEGO replacement sensors, inlet air temp sensors (IAT), K-Type sensors and more. All sensors come with a three- ...
Part No: AEM-30-2001