HKS HIPERMAX S 03-09 Subaru Legacy Sedan/Touring Wagon Full Kit

03-09 Subaru Legacy Sedan / Touring Wagon

$2,910.00 CAD

Select Your Vehicle

Best Price Guarantee

No Customs or Duties

Guaranteed Fitment

Full Warranty

Description

Going beyond just ride comfort or handling performance, a new standard of "Driving Comfort" aims for comfort in ride but also in the peace of mind generated by handling performance and drivability . An uncompromising balance which delivers on all the demands of street driving.

The model in the photo is BP5.

Application

Engine	EJ20
Model Year	03/05 - 09/04
Remarks

Specification

	FRONT	REAR
Damping force adjustment	30 steps	30 steps
Base valve	-	-
Height adjustable lower bracket	〇	〇
Upper mount	Rubber	Rubber
Inverted/Normal type	Inverted	Normal
Damper/Spring layout	Coilover	Coilover
Spring rate change at factory	Impossible	Impossible
Damping force adjustment with wire	-	-
Helper spring (Spring rate N/mm)	〇 (4.7)	〇 (4.7)

Ride Heightmm

		Factory *2	Test data	Adjustable range High - Low *3	Drivable range High - Low *4
FRONT	Ride height *1	641	←	670 ～ 608	670 ～ 608
FRONT	Against stock	-29	←	0 ～ -62	0 ～ -62
REAR	Ride height *1	640	←	668 ～　589	668 ～　589
REAR	Against stock	-29	←	-1 ～ -80	-1 ～ -80

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

	F	R
Spring rate N/mm(kgf/mm)	69 ( 7.0 )	69 ( 7.0 )
Free height (mm)	220	200
Spring type	Straight Barrel type	Straight
Recommended range to change spring rate N/mm(kgf/mm)	-	-

Specification of damper

	F	R
Damping force (Rebound/Damping)N*	343 / 314	397 / 358
Default position of dial	15	15
Remaining damper stroke (Rebound/Damping)mm	51 / 62	51 / 48

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

	F				R
	Default	Test	Drivable limit High *	Drivable limit Low *	Default	Test	Drivable limit High *	Drivable limit Low *
Length of case (mm)	278	←	292	278	260	←	271	250
Spring Set length(mm)	247	←	233	279	230	←	223	253
Length to ride hight adjuster (mm)	48	←	76	16	36	←	54	3
Lever ratio	1.02				1.56

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

		F	R
Vehicle weight kg		-　(880)	-　(640)
Tire size (Air pressure) kPa		225 / 40 - 18 ( 220 )	225 / 40 - 18 ( 220 )
Wheel size		8.5 JJ × 18 inset 48	8.5 JJ × 18 inset 48
Alignment (Toe/Camber)	Test data	in 0 mm / -1°50'	in 0 mm / -2°10'
Alignment (Toe/Camber)	Standard value	in 0 ± 3 mm / -0°40' ± 0°45'	in 0 ± 3 mm / -1°35' ± 0°45'